Pro Dual Wheel Spacers - Round Tube

We have had requests for larger center dual wheel spacers that will clear the inner hubs of some brands. The larger center is 3" clear inside diameter. These are premium new dual wheel adaptors for your garden tractor. They will fit Cub Cadet, John Deere, Simplicity, AC, Sears, and most garden tractors that use the 12" rim with the 5 bolts on a 4 1/2" diameter bolt circle. These rims were widely used by most lawn and garden tractor manufacturers. Have been used on 6 and 8-wheel swamp buggies and trenchers. Not recommended for speeds over 10 MPH, Competition Pulling Use, or High Speed Applications. Our spacers are made with 5/16" thick, grade 50 steel, outer plates. The inner plate is chamfered to accept wheel studs or nuts. The square tube is a 3" x 3/16" wall tube. We fully weld the plates to the tubes on the inside and outside, providing maximum strength, not like some out there that just weld a plate to a tube. Then we use fine thread, grade 5, zinc-coated bolts through the outer plates and weld the backsides. The reason for this is that the bolt can be cut out and a new one welded in. Tapped plates are not as easily repairable! We provide fine thread, chrome-plated acorn nuts to finish out the package. Cover plates are included to slide over the studs to cover up the end of the tube. Ships unpainted unless you purchase powder coating, below. Ships unpainted unless you purchase powder coating.  These are sold as a set.