Narrow Frame Series

Adjustable lift rod provides 2.5" of travel on the adjuster nut end. The rod can be adjusted from: 28" rod adjusts from 25.5" to 30.5" 31" rod adj...

The Standard Sleeve Hitch Kit for Cub Cadets offers versatile solutions with three configurations: Floating Straps, Static Straps, and Multi-Config...

Finally, a bolt-on toolbox for your Quietline, Wideframe, 82 Series, Some Cyclops and others that use the Wideframe series fenders. Bolts on using ...

The Cub Cadet Bolt On Rear Hitch replaces your old factory bolt-on hitch with a new 1/4" thick model featuring an extra hole designed for a 3/4" sh...

The Cub Cadet Bolt On Receiver Hitch is a heavy-duty, versatile hitch designed for newer series Cub Cadets with aluminum rear end housings. It feat...

Reproduction drive hubs for the narrow and wide frame cub cadets. Made from 1045 CR steel. Cub Cadet PN# IH-394034-R21 USE IH-394034-R32 PN# CC-80-001

A new style differential cover that allows you to fill your rear end without having to use the fill tube. Bottom of the fill hole is matched to the...

Fits 105 thru 2284 Cub Cadet Tractors. 703-0194 IH-144749-C91 903-0194 UNPAINTED

Narrow frame front bumper / weight bracket. This is a 4 piece bolt together bumper / weight bar kit. It has to bolt together so that it can fit aro...

For use with the factory cast iron 3rd point lifting system. UNPAINTED Pick your model from the list below.

The 3" Extended Sleeve Hitch Kit offers an additional 3 inches of length, ideal for tractors that keep their tiller gear boxes installed. This comp...

Stainless Steel Exhaust Tip for Diesels. This is just for the extended tip. Muffler or rest of tractor not included. Approx. 12" long. PN# CC-31-100

Cub Cadet Side Panel Extension Plates - Left and Right.  Brand new.   IH 544192 R1, 86, 108, 109, 128, 129, 149, 169, 

If you have a Brinly style sleeve hitch with the single or dual tab bracket, then you can use the Sleeve Hitch Weight Bracket. Attaches quickly and...

Hydro Cam Pivot Bracket. Fits older cub cadets not listed above. Prior to the 82 series. Fits Quietlines. UNPAINTED PN# CC-23-003

Need a way to add some stability to the rear axle of your tractor? Introducing the race brace. It uses the 2 holes in the axle tube and nests up ag...

Reproduction of the Cub Cadet Hydraulic Lift Pump Base Bracket. PN# CC-23-052

Creeper Drive Shift Yoke PN/ IH-385042-R1 USE 703-0409 IH 385042 R1 Unpainted PN# CC-96-001

Clutch operating yoke bracket NF PN/ IH-384656-R1 USE IH-384656-R2 IH 384656 R1 Unpainted PN# CC-96-002

Solid motor mounts that go between the motor plates and frame. Grade 8 hardware and Nylock nuts. PN# CC-96-503

Reproduction of the 72 - 125 Cub Cadet Headlight Mounting Panel. Part is made of thicker material, with PEM studs that are set thru the front side ...

This is the cover plate for the back of the frame for 70 / 100's and other models that use the same style frames - like the 71, 102, 122, 72, 104, ...

These are the brackets that you need to mount a CW-36 Snowblower up to a Narrow Frame Tractor. IH-475561-R1    IH-475562-R1 Sold as a left and righ...

The Narrow Frame Cat 0 - 3 Point lift system is a complete kit designed specifically for Cub Cadet Narrow Frame Tractors without PTO, including mod...