82 Series and Up

This is a tie rod upgrade to the 82 series and quite a few tractors following it. It is not for the SGT's. Will work with power steering. Rod is .3...

Need a way to add some stability to the rear axle of your tractor? Introducing the race brace. It uses the 2 holes in the axle tube and nests up ag...

These are the newer style mounting brackets for the Haban blades used on the 1991 and later Cyclops tractors - Kit# 190-401-100. Allows the mountin...

Turnbuckle Chain set keeps your equipment from swinging side to side. Has a 250# load buckles. Stainless steel loops bolt to your arms, providing a...

These are new front hub adaptors for the front of your garden tractor. They allow you to put a 4 x 4" (4 x 110) bolt pattern rim on the front. They...

For manual transmission cub cadets. May also work on others. 5/8" ID with 1/4 holes for shear pins (not included) Replaces Cub Cadet PN# IH-394036-...

For mounting the power steering sector into 82 series tractors. Very hard to find. Unpainted. PN# CC-30-001

1/4" NPTF Female Threads. 3000PSI Rating. These are the industrial standard, which are different from the original cub cadet couplers. The Cub Cad...

Weld this clevis onto your implement to attach the load lock to. 5/8" dia. holes. Can also be used for building cat 0 equipment connections. UNPAIN...

Fits category 0 three point hitches. The ends are 5/8" diameter with 1/4" holes for retainer pins. The (7) holes in the bar are 3/4" for ball hitch...

The SGT Category 0 Adjustable 3rd Link is engineered for Super Garden Tractors equipped with factory 3-point hitch systems. This upper link feature...

Reproduction Lift Link Adjusters for the Cub Cadet Super Garden Tractors. Just like the originals. Comes as a pair as shown. Unpainted

Reproduction Drag Arms and Lift Link Adjusters for the Cub Cadet Super Garden Tractors. Just like the originals. Comes as a complete kit as shown. ...

Replace your worn-out step pads with these Aluminum Step Pads. Made out of .080" Thick Brite-Tread Aluminum.

This is a combination lift and push bracket for the Cyclops snow blowers and push blades. Dimensionally same shape as the originals, but made out o...

Reproduction of the original unit. Unpainted. IH 738-3024 PN# CC-12-015  

Reproduction of the original unit. Unpainted.

This is a combination lift and push bracket for the Cyclops snow blowers and push blades. Dimensionally same shape as the originals, but made out o...

1/4" NPTF Female Threads. 3000PSI Rating. These are the industrial standard, which are different from the original cub cadet couplers. The Cub Cad...

5/8" x 1 1/2" Headed Pin PN# CC-36-007

Manufactured adjustable 3 point upper link bracket. If you have an original Cub Cadet 3 point lift, and are missing this bracket, now you can get a...

If you have a category 0 3 point drawbar (CC-98-002) then these drawbar locks are a must. Keeps the drawbar from rotating if using a ball hitch. Cl...

Connects the 3rd link to your implement. Completely adjustable from 10" to 15". 5/8" holes. Comes with hole in the middle and rod to make it a T-Ha...