70 / 100 Series

Narrow Frame lift bracket blocks. Comes with hardware.

For manual transmission cub cadets. May also work on others. 5/8" ID with 1/4 holes for shear pins (not included) Replaces Cub Cadet PN# IH-394036-...

Turns the air/fuel flow into the valve chamber into a straighter, condensed streamlined flow. 1/4" stick steel. Gaskets or bolts not included. No G...

Reproduction of the 72 - 125 Cub Cadet Headlight Mounting Panel. Part is made of thicker material, with PEM studs that are set thru the front side ...

Upgrade your Cub Cadet 70/100 with authentic Cat 0-3 Point capability. This premium lift kit delivers the same professional-grade features found in...

This is the front mounting bracket for the Cub Cadet Narrow Frame Spring Assists. Fits: 70, 71, 72, 73, 100, 102, 104, 105, 106, 107, 122, 123, 124...

Reproduction of the Cub Cadet Original "O" mule drive or front pulley setup.  Being that the bearings are unable to be sourced, we made new pulleys...

This is the cover plate for the back of the frame for 70 / 100's and other models that use the same style frames - like the 71, 102, 122, 72, 104, ...

Reproduction of the Cub Cadet Hydraulic Lift Pump Base Bracket. PN# CC-23-052

This is a new reproduction 3 pin clutch driver for manual transmission Cub Cadets. Heavy duty .179 backer with machined hub and oilite iron bronze ...

Reproduction of the 71 - 123 Cub Cadet Headlight Mounting Panel. Part is made of thicker material, with PEM studs that are set thru the front side ...

Mulching Plate "V" Nose 42" Deck Fits 42 inch decks PN/ IH-490562-R1

New reproduction deck mount brackets.  These are for mounting a timed deck on a 70/100. Sold as a pair.  Ships unpainted

These are new front hub adaptors for the front of your garden tractor. They allow you to put a 4 x 4" (4 x 110) bolt pattern rim on the front. They...

Wear edge for BB36 and CW36 Snow Throwers. UNPAINTED. Similar to Cub Cadet # IH-475566-R1

These are the covers for the Aluminum or Cast Iron Rear Ends. Made out of 3/16 thick steel. Thick enough to weld on or build off of. Sold each, Unp...

These brackets were used for putting an "Original" timed deck on a 70/100 Unpainted. PN# CC-96-065

Reproduction of the Cub Cadet Hydraulic Lift Pump Mounting Pin. PN# CC-23-051

Reproduction of the Cub Cadet Hydraulic Lift Pump Mounting Bracket. PN# CC-23-050

Stainless Steel Exhaust Tip for Diesels. This is just for the extended tip. Muffler or rest of tractor not included. Approx. 12" long. PN# CC-31-101