1x9 Series

A new style differential cover that allows you to fill your rear end without having to use the fill tube. Bottom of the fill hole is matched to the...

Adjustable lift rod provides 2.5" of travel on the adjuster nut end. The rod can be adjusted from: 28" rod adjusts from 25.5" to 30.5" 31" rod adj...

The Standard Sleeve Hitch Kit for Cub Cadets offers versatile solutions with three configurations: Floating Straps, Static Straps, and Multi-Config...

The Cub Cadet Bolt On Rear Hitch replaces your old factory bolt-on hitch with a new 1/4" thick model featuring an extra hole designed for a 3/4" sh...

The Cub Cadet Bolt On Receiver Hitch is a heavy-duty, versatile hitch designed for newer series Cub Cadets with aluminum rear end housings. It feat...

Stainless Steel Exhaust Tip for Diesels. This is just for the extended tip. Muffler or rest of tractor not included. Approx. 12" long. PN# CC-31-100

For use with the factory cast iron 3rd point lifting system. UNPAINTED Pick your model from the list below.

The 3" Extended Sleeve Hitch Kit offers an additional 3 inches of length, ideal for tractors that keep their tiller gear boxes installed. This comp...

Reproduction drive hubs for the narrow and wide frame cub cadets. Made from 1045 CR steel. Cub Cadet PN# IH-394034-R21 USE IH-394034-R32 PN# CC-80-001

Hydro Cam Pivot Bracket. Fits older cub cadets not listed above. Prior to the 82 series. Fits Quietlines. UNPAINTED PN# CC-23-003

Fits 105, 107, 109, 123, 125, 127, 129, 147, 149, 169, 1250, 1450, 1650 IH-528868-R1 IH-548057-R2 UNPAINTED PN# CC-24-005

Fits 105 thru 2284 Cub Cadet Tractors. 703-0194 IH-144749-C91 903-0194 UNPAINTED

Spacers your carb out by 1/4". Stack more to increase distance for performance tuning. Gaskets or bolts not included. UNPAINTED PN# CC-32-001

Turns the air/fuel flow into the valve chamber into a straighter, condensed streamlined flow. 1/4" stick steel. Gaskets or bolts not included. No G...

The Narrow Frame Cat 0 - 3 Point lift system is a complete kit designed specifically for Cub Cadet Narrow Frame Tractors without PTO, including mod...

Narrow frame front bumper / weight bracket. This is a 4 piece bolt together bumper / weight bar kit. It has to bolt together so that it can fit aro...

These are new front hub adaptors for the front of your garden tractor. They allow you to put a 4 x 4" (4 x 110) bolt pattern rim on the front. They...

These are new front hub adaptors for the front of your garden tractor. They allow you to put a 5 x 4 1/2" bolt pattern rim on the front. They have ...

If you have a Brinly style sleeve hitch with the single or dual tab bracket, then you can use the Sleeve Hitch Weight Bracket. Attaches quickly and...

Narrow Frame lift bracket blocks. Comes with hardware.

For manual transmission cub cadets. May also work on others. 5/8" ID with 1/4 holes for shear pins (not included) Replaces Cub Cadet PN# IH-394036-...

These are the covers for the Aluminum or Cast Iron Rear Ends. Made out of 3/16 thick steel. Thick enough to weld on or build off of. Sold each, Unp...

Reproduction of the Cub Cadet Hydraulic Lift Pump Base Bracket. PN# CC-23-052

Reproduction of the Cub Cadet Hydraulic Lift Pump Mounting Pin. PN# CC-23-051