|
|
||||||
|
Click on picture for more details. |
$472.00
CC-03-001
Similar to Cub Cadet #190-389 and 190-389-100 |
Category 0 - 3 Point Lift 82 Series and up
OEM Replica
Regular Garden Tractors |
Reproduction Category 0 - 3 Point lift system. The kit is designed to work off of the single deck lift system. You can leave your deck on and lock it in the up position while using your 3 point accessories. Complete kit. Retrofit to fit more tractors than the original 190-389 or 190-389-100 kit by Cub Cadet. Pictures above are shown on a 782. Will not work on tractors with PTO. Part is raw steel, UNPAINTED. Buyer must make sure this will fit his tractor before ordering.
Make sure that you order the correct kit depending on if you have a regular or super garden tractor. |
|||
|
$472.00
CC-03-101
|
Category 0 - 3 Point Lift 82 Series and up
OEM Replica
Super Garden Tractors |
|||||
|
Click on picture for more details.
|
$480.00
CC-03-001M
|
Category 0 - 3 Point Lift 82 Series and up
New Multi-Configuration
Regular Garden Tractors |
Same as above but offers multi lifting configurations. We've just made the best better!
Make sure that you order the correct kit depending on if you have a regular or super garden tractor. |
|||
|
$480.00
CC-03-101M
|
Category 0 - 3 Point Lift 82 Series and up
New Multi-Configuration
Super Garden Tractors |
|||||
|
Click on picture for more details.
|
$1095.00
CC-03-001SS
|
Category 0 - 3 Point Lift 82 Series and up
Stainless Steel |
Same as CC-03-001 Except in Stainless Steel. This kit is built per order, so please allow 2 weeks extra for cut and build. Will build per tractor. Call with questions. |
|||
|
Click on picture for more details.
|
$482.00
CC-03-013
|
Category 0 - 3 Point Lift
Quietlines |
New Category 0 - 3 Point lift system. Complete kit. Never produced before!!! Pictures above are shown on a 1650. Will not work on tractors with PTO. Designed to be similar to the 82 series kits below. Will fit the following tractors without PTO: 800, 1000, 1250, 1450, 1650 Will also fit a 129, 149 and 169 - not tested by myself yet. May fit others, but not tested yet. Parts are all raw steel, UNPAINTED. Buyer must make sure this will fit his tractor before ordering. Click HERE to download the installation instructions for this. |
|||
|
Click on picture for more details. |
$482.00
CC-03-200
|
Category 0 - 3 Point Lift
Narrow Frame Cub Cadets |
New Category 0 - 3 Point lift system. Complete kit. Never produced before!!! Pictures above are shown on a 1650. Will not work on tractors with PTO. Designed to be similar to the 82 series kits below. Will fit the following tractors without PTO: 107, 127, 147 May fit other narrow frames with some small modifications to the lift shaft. May fit others, but not tested yet. Parts are all raw steel, UNPAINTED. Buyer must make sure this will fit his tractor before ordering. |
|||
|
Click on picture for more details.
|
$185.00
CC-03-002
Similar to Cub Cadet #703-0808 |
Category 0 - 3 Point Lift Replacement Plate
OEM Replica |
This is a replacement plate for your 3-point lift system. Similar to kit #190-389 and #190-389-100 |
|||
|
Click on picture for more details.
|
$185.00
CC-03-002M
Similar to Cub Cadet #703-0808 |
Category 0 - 3 Point Lift Replacement Plate
New Multi Configuration |
This is a replacement plate for your 3-point lift system. Similar to kit #190-389 and #190-389-100 - but with multi lift configurations. |
|||
|
Click on picture for more details.
|
$125.00
CC-03-002ME
Similar to Cub Cadet #703-0808 |
Category 0 - 3 Point Lift Replacement Plate
Multi Configuration
Exchange |
Send in your current plate and we will rebuild it with the multi lift configuration arms. |
|||
|
|
$45.00
CC-03-PAINT
|
Painting for Cat. 0 - 3 Points |
Get your 3 point painted to match your tractor. Colors are Red, Black, Yellow, Cub Cadet White. |
|||
|
Click on picture for more details.
|
$90.00
CC-03-006
Similar to Cub Cadet #703-0815 |
Category 0 - 3 Point Lift Arms |
Reproduction Category 0 - 3 point Lift Arms. Sold as a set. |
|||
|
Click on picture for more details.
|
$45.00
CC-33-002
|
Category 0 - 3 Point Lift Cross Chain Set |
Turnbuckle Chain set keeps your equipment from swinging side to side. Has a 250# load buckles. Stainless steel loops bolt to your arms, providing a nice clean attachment point. Low profile clears equipment. Comes with hardware. Will fit other brands. |
|||
|
Click on picture for more details.
|
$60.00
CC-03-007A
Similar to Cub Cadet #703-0811
|
Cub Cadet Category 0 - 3 Point Lift Link Shaft Regular 82 Non-Super Tractors |
Connects the 3 point to the hydraulic cylinder. 82 Series, Spread Frames - Unpainted |
|||
|
Click on picture for more details.
|
$65.00
CC-03-007B
|
Cub Cadet Category 0 - 3 Point Lift Link Shaft Most Super Tractors |
Connects the 3 point to the hydraulic cylinder. Supers, Spread Frames - Unpainted |
|||
|
Click on picture for more details.
|
$55.00
CC-34-002
Similar to Cub Cadet #703-0814 & 711-3122 |
Cub Cadet Category 0 - 3 Point Lift Link |
Connects the 3 point rock shaft arms to the lift arms. 5/8" - Cat. 0 ball sockets, 5/8 threaded shaft. 5/8 Furrels. Exact Replicas. Sold as a set. |
|||
|
Click on picture for more details.
|
$20.00 pr.
CC-03-012
Similar to Cub Cadet #711-3122
|
Cat 0 Replacement Ferrules |
Replacement ferrule for Cub Cadet 3 point lifts. 5/8" Threaded hole, 5/8" Stud, 1/8" Pin Hole. |
|||
|
|
$16.00
CC-03-015
|
Quietline Float Lockout Pin |
Used to remove the float in your quietlines lift system. Great for push blades to get down pressure. |
|||
|
$40.00
CC-35-002A
Similar to Cub Cadet # 749-0238
|
Category 0 - Adjustable 3rd Link |
Connects the 3rd link to your implement. Completely adjustable from 10" to 15". 5/8" holes. Comes with hole in the middle and rod to make it a T-Handle. |
|||
|
Click on picture for more details.
|
$95.00
CC-19-001
|
Category 0 - A-Frame with Sleeve Hitch Adaptor |
A-frame for moving around your trailers, etc. Has 3 holes for mounting balls or clevis. Turn the frame around and has a mount for sleeve hitch equipment. Has dual lower side holes for the lower pins to get more lift out of your 3 point. Comes with lower Cat. 0 pins, and 3/4" sleeve adjuster bolts. Does not include ball or top pin. UNPAINTED. |
|||
|
Click on picture for more details.
|
$85.00
CC-19-001B
|
Category 0 - A-Frame |
A-frame for moving around your trailers, etc. Has 3 holes for mounting balls or clevis. Has dual lower side holes for the lower pins to get more lift out of your 3 point. Comes with lower Cat. 0 pins, and 3/4" sleeve adjuster bolts. Does not include ball or top pin. UNPAINTED. |
|||
|
Click on picture for more details.
|
$225.00
CC-19-100
|
Category 0 - A-Frame Quick Attack |
This is a quick attach category 0 A-frame for hooking up Category 0 equipment. Same frame dimensions as CC-19-001. Allows you to hook any Cat 0 equipment up in a minute and unattached as fast. Has 3 holes on top for attaching a ball. Does not come with a sleeve hitch adaptor. |
|||
|
|
$85.00
CC-19-200
|
Category 0 Suitcase Weight Adaptor |
A weight bracket for holding suitcase weights on your 3 point lift. Category 0 attachments. 1/2" x 2" bars allow hanging of most all garden tractor suitcase weights on the front side, back side or both. Unpainted. |
|||
|
Click on picture for more details.
|
$43.00
CC-47-001
|
Sleeve Hitch Ball / Pin Hitch Adaptor |
Extra wide Brinly style sleeve hitch bracket. Allows you to pull a trailer or other stuff around without having to take off your sleeve hitch. Has a 3/4" hole for a ball attachment and a 5/8" hole for attachments using a drawbar pin. Does not include the ball. |
|||
|
Click on picture for more details.
|
$45.00
CC-20-001
|
Sleeve Hitch Ball Hitch Adaptor |
Stock size Brinly style clevis hitch blank. Use it to convert your existing equipment over to sleeve style hitches or use to build that custom project. |
|||
|
|
$18.00
CC-20-002
|
Brinly Style Implement Yoke Convert anything to a Sleeve Hitch |
Lets say that you have an pold poiece of equipment that you want to use on your sleeve hitch on your tractor. Buy this clevis and weld or bolt it to your equipment or create that cutom piece of equipment. Convert anything to a Sleeve Hitch style piece of equipment. Made out go Grade 50 Hot Rolled Steel for long life. 5/8" holes. 3 1/2" inside distance. |
|||
|
|
$21.00
CC-20-003
|
Sleeve Hitch Yoke |
Similiar to above but .25" deeper and only has a single hole. Works well with some of the John Deere Hitches. Made out go Grade 50 Hot Rolled Steel for long life. 5/8" holes. 3 1/2" inches inside dieameter. |
|||
|
Click on picture for more details.
|
$28.00
CC-53-001
Similar to Cub Cadet #703-0904
|
Dual Hole Hitch - Cast Iron Rear End |
Replace your old work out factory bolt on hitch with a new 1/4" one with an extra hole for a 3/4" shaft ball. Eliminates the need to take your ball on and off. Fits all cast iron rear ends. Works on stock rear ends and three points. |
|||
|
Click on picture for more details.
|
$28.00
CC-53-002
Similar to Cub Cadet #703-0904
|
Dual Hole Hitch - Aluminum Rear End |
Replace your old work out factory bolt on hitch with a new 1/4" one with an extra hole for a 3/4" shaft ball. Eliminates the need to take your ball on and off. Fits all cast iron rear ends. Works on stock rear end, and three points. |
|||
|
Click on picture for more details. |
$65.00
CC-05-001
|
Cub Cadet Receiver Mount Hitch Aluminum Rear Ends |
A heavy duty hitch for your cub cadet that will give you the flexibility of adding many attachments to your tractor. Any receiver mount hitch that fits your car or truck will fit in this receiver. It is the same 2" as a vehicles. Heavy duty 1/4" back plate is laser cut for supreme accuracy and uses 7 mounting bolts for extreme rigidity. Receiver is 1/4" wall also! Uses the standard 5/8" hitch pin. You could put your bike rack in here, a platform for putting your tools and supplies on, a digger or a garden attachment, a sprayer, a hitch mounted winch, a generator unit, etc..... The possibilities are endless of what you can build. This one fits the newer series cub cadets with the aluminum rear end housing. |
|||
|
Click on picture for more details.
|
$65.00
CC-07-001
|
Cub Cadet Receiver Mount Hitch Cast Iron Rear Ends |
This one fits the older series cub cadets with the cast iron rear end housing. |
|||
|
|
$65.00
CC-07-002
|
Cub Cadet Receiver Mount Hitch For 3 Points |
This one fits the Category 0 - 3 Points above. Lower clearance on the mounting plate keeps it from hanging too far below the 3 point plate. |
|||
|
Click on picture for more details.
|
$93.00
CC-07-003
|
Cub Cadet Adjustable Height Removable Hitch |
Bolts onto the cast iron or the aluminum rear ends in place of the stock bent hitch. Pull the pins and move the hitch up or down to keep your trailer level. Has a 3/4" hole for a ball and a 5/8" hole at the end for pull implements. |
|||
|
Click on picture for more details.
|
$65.50
CC-54-001
|
Rear Hitch Plate |
Close up the rear of your tractor for that finished off look. Made out of .134" thick steel. |
|||
|
|
$315.50
CC-73-001
|
Front Generator Mount - Pincor Style |
Mount for the front of your wideframe and 82 series tractors to mount a generator on. Very similar to the Pincor ones. Will hold multiple size generators. Runs off of the electric clutch. Generator / Belt / tractor not furnished. |
|||
|
|
$65.50
CC-72-001
|
Sleeve Hitch Weight Bracket |
If you have a Brinly style sleeve hitch with the single or dual tab bracket, then you can use the Sleeve Hitch Weight Bracket. Attaches quickly and allows you to hang suitcase style weights on the rear. Works great with XMW Suitcase weights. |
|||
|
|
$9.50 ea. CC-36-002 |
Category 0 - Weld Ball Sockets |
Used for Cat. 0 projects. 2" OD, 5/8" pin hole, 1" wide. |
|||
|
|
$6.00 ea. CC-36-003 Similar to Cub Cadet # 711-0497 |
Category 0 - Draft Pins |
Used for Cat. 0 projects. 5/8" shaft , 5/8" Threaded end. Includes nut and lock washer |
|||
|
|
$5.00 ea. CC-36-004
|
Category 0 - Top Link Pin - Straight |
|
|||
|
$5.00 ea. CC-36-011
|
Category 0 - Top Link Pin - Bent |
|||||
|
|
$1.00 ea. CC-36-005 |
1/4" Lynch Pins |
||||
|
|
$3.00 ea. CC-36-006 |
5/8" x 1" Headed Pin |
||||
|
$3.00 ea. CC-36-007 |
5/8" x 1 1/2" Headed Pin |
|||||
|
|
$0.50 ea. CC-36-008 |
1/8" x 1 1/2" Cotter Pin |
||||
|
|
$0.60 ea. CC-36-008 |
1/8" Hair Pin |
||||
|
|
$10.00 ea. CC-36-009 |
1 7/8" Ball w/ 3/4" Shaft |
||||
|
$11.00 ea. CC-36-010 |
2" Ball w/ 3/4" Shaft |
|
||||
|
|
||||||
|
|
CC-03-033 $45.50
|
82 Series 3 Point Lift Bar |
For use with the factory cast iron 3rd point lifting system. Fits 782, 784, 1711, and 1712 below S/N 719999 |
|||
|
|
CC-03-030 $45.50
|
Wide Frame 3 Point Lift Bar |
For use with the factory cast iron 3rd point lifting system |
|||
|
|
CC-03-031 $45.50
|
Narrow Frame 3 Point Lift Bar |
For use with the factory cast iron 3rd point lifting system |
|||
|
|
CC-03-032 $45.50
|
Original 3 Point Lift Bar |
For use with the factory cast iron 3rd point lifting system |
|||
|
Click on picture for more details. |
||||||
|
|
End the fear of ever pulling the bolts out of your rear end. Also eliminates the bracket bending in on the sides, with or without dual pin plates or extra ears that go to your axle tubes.! Made from 1/4" steel. Universal so they will fit the cast iron rear ends or the aluminum rear ends found in later CCC tractors. Unpainted. |
|||||
|
CC-29-010 $72.00
|
Xtreme Hitch - Lower Sleeve Hitch U-Bracket 4 Hole Dual Tab - W/ears |
|||||
|
CC-29-020 $52.00
|
4 Hole Dual Tab - W/O ears |
|||||
|
CC-29-030 $52.00
|
4 Hole Single Tab - W/ears |
|||||
|
CC-29-040 $32.00
|
4 Hole Single Tab - W/O ears |
|||||
|
CC-29-050 $64.00
|
3 Hole Dual Tab - W/ears |
|||||
|
CC-29-060 $44.00
|
3 Hole Dual Tab - W/O ears |
|||||
|
CC-29-070 $44.00
|
3 Hole Single Tab - W/ears |
|||||
|
CC-29-080 $26.00
|
3 Hole Single Tab - W/O ears |
|||||
|
|
CC-29-101 $21.00 |
3 Hole Sleeve Hitch Bracket |
Standard 3 hole sleeve hitch bracket. Fits cast iron and aluminum rear ends on all cub cadets. Unpainted. |
|||
|
|
CC-29-102 $23.00
|
3 Hole Sleeve Hitch Bracket - Wide |
Wider 3 hole sleeve hitch bracket. Fits cast iron and aluminum rear ends on all cub cadets. Bolts under CC-29-101 to create a dual tab hitch. DOES NOT INCLUDE CC-29-101. Unpainted. |
|||
|
|
CC-29-103 $25.00
|
4 Hole Sleeve Hitch Bracket |
4 hole sleeve hitch bracket. Fits cast iron and aluminum rear ends on all cub cadets. Great for tractors running 26x12-12 tires. Gives you another hole 1" lower to bring your plow angle back to level. Great for Super Garden Tractors. Unpainted. |
|||
|
|
CC-29-104 $30.00
|
4 Hole Sleeve Hitch Bracket - Wide |
4 hole sleeve hitch bracket. Fits cast iron and aluminum rear ends on all cub cadets. Great for tractors running 26x12-12 tires. Gives you another hole 1" lower to bring your plow angle back to level. Great for Super Garden Tractors.Bolts under CC-29-103 to create a dual tab hitch. DOES NOT INCLUDE CC-29-103. Unpainted. |
|||
|
|
CC-29-111 $137.00 |
Sleeve Hitch Kit - Floating Straps |
Standard Sleeve Hitch Kit. Complete. Unpainted. |
|||
|
|
CC-29-111 $137.00
|
Sleeve Hitch Kit - Non-Flaoating Straps |
Standard Sleeve Hitch Kit. Complete. Unpainted. |
|||
|
|
CC-29-112 $80.00 |
Sleeve Hitch Main Bracket |
Replacement Brinly Style Sleeve Hitch Bracket. Unpainted. |
|||
|
|
CC-29-113 $18.00 |
Sleeve Hitch Lift Straps - Locking |
Replacement Lift Straps - Locking. Unpainted. |
|||
|
|
CC-29-114 $18.00 |
Sleeve Hitch Lift Straps - Floating |
Replacement Lift Straps - Floating. Unpainted. |
|||
|
|
CC-29-115 $18.00 |
Sleeve Hitch Lift Pin |
Replacement 1" Sleeve Hitch Lift Pin. Unpainted. |
|||
|
|
CC-29-116 $12.00 |
Sleeve Hitch Draft Plate |
Replacement Draft Plate. Unpainted. |
|||
|
|
CC-29-117 $14.00 |
Sleeve Hitch Implement Pin |
Sleeve Hitch Implement Pin. Unpainted. |
|||
|
|
CC-29-118 $22.00 |
Sleeve Hitch Hardware Kit |
Sleeve Hitch Hardware Kit. |
|||
|
|
CC-20-008 $3.00
|
Brinly Cultivator Clamp |
Used on Brinly cultivators. Reproduction. Clamp only - sold individually. Picture shown with Wedge to show group. Wedge not included. |
|||
|
|
CC-20-009 $3.00 |
Brinly Cultivator Wedge |
Used on Brinly cultivators. Reproduction. Wedge only - sold individually. Picture shown with Clamp to show group. Clamp not included. |
|||
|
|
CC-29-120 $68.00 |
Brinly Sleeve Hitch Extenders |
Add 3 to 4" onto your Brinly sleeve hitch bracket with this extension kit so that you can leave your sleeve hitch on with your tiller gear box. All hardware included. Does not include the the sleeve hit bracket shown in the top picture. Use with extended pin CC-29-115E below. Unpainted |
|||
|
|
CC-29-115E $26.00 |
Sleeve Hitch Lift Pin - Extended |
Extended 1" Sleeve Hitch Lift Pin for use with CC-29-120. 3" Longer with extra hole for extended length sleeve hitch. Unpainted. |
|||
|
|
||||||
|
|
|
$55.00 |
|
HD Rib V61. The king of performance for the front of your garden tractor. Buy your rims and tires from us, and we will install the stems and mount for free. Stock and custom rims listed below. Remainder Of Actual Shipping Will Be Charged Over Initial $15 Shipping Fee. |
||
|
$70.00 |
|||||
|
$80.00 |
|||||
|
|
|
$75.00 |
Carlisle |
Carlisle. Good performance for your money. Great for multi purpose use. Buy your rims and tires from us, and we will install the stems and mount for free. Stock and custom rims listed below. Remainder Of Actual Shipping Will Be Charged Over Initial $15 Shipping Fee. |
||
|
$100.00 |
|||||
|
$110.00 |
|||||
|
$120.00 |
|||||
|
|
23x10.50-12 4 Ply. |
$140.00 |
|
Firestone Flotation 23 Degree. The best tire you can get for your buck. High Aggressive lugs offer exceptional biting in all types of ground. Buy your rims and tires from us, and we will install the stems and mount for free. Stock and custom rims listed below. Remainder Of Actual Shipping Will Be Charged Over Initial $15 Shipping Fee. |
||
|
26x12-12 4 Ply. |
$180.00 |
|||||
|
|
||||||
|
Click on picture for more details. |
CC-01-001-700 $90.00
|
Garden Tractor Dual Wheel Spacers For 6-12 Tires |
These are premium new dual wheel adaptors for you garden tractor. They will fit Cub Cadet, John Deere, Simplicity, AC, Sears and most garden tractors that use the 12" rim with the 5 bolts on a 4 1/2" diameter bolt circle. These rims were widely used between most lawn and garden tractor manufactures. Have been used on 6 and 8 wheel swamp buggies and trenchers.
Sold in pairs, Wheels and tires not included.
Choose between painted or unpainted.
Standard colors only. |
|||
|
CC-01-001-700-P (PAINTED) $110.00
|
||||||
|
CC-01-001-900 $95.00
|
Garden Tractor Dual Wheel Spacers For 23 x 8.5 - 12 Tires |
|||||
|
CC-01-001-900-P $115.00
|
||||||
|
CC-01-001-110 $95.00
|
Garden Tractor Dual Wheel Spacers For 23 x 10.5 - 12 Tires |
|||||
|
CC-01-001-110-P $115.00
|
||||||
|
CC-01-001-125 $100.00
|
Garden Tractor Dual Wheel Spacers For 26 x 12 - 12 Tires |
|||||
|
CC-01-001-125-P $120.00
|
||||||
|
CC-01-001-C $105.00
|
Garden Tractor Dual Wheel Spacers Custom Width |
|||||
|
CC-01-001-C-P $125.00
|
||||||
|
|
CC-01-030 $95.00 |
4 Bolt x 4" - Dual Wheel Spacers |
These are premium new dual wheel adaptors for you garden tractor. They are 4 hole on 4" bolt circle - 1/2" diameter studs.
Specify length when ordering.
Sold in pairs, Unpainted. |
|||
|
Click on picture for more details. |
CC-01-040 $95.00 |
4 Bolt x 4" to 5 Bolt x 4 1/2" - Wheel Adaptors - 1 1/2" long |
These adaptors will allow you to put a 4 bolt rim (ie: Golf cart rim ) that has the 4 hole by 4" bolt pattern on your 5 bolt garden tractor. Will increase the stance also. Sold in pairs, Unpainted. |
|||
|
|
CC-01-001-XP $145.00 |
Garden Tractor Dual Wheel Spacers - Custom |
These are premium new dual wheel adaptors for you garden tractor. They will fit Cub Cadet, John Deere, Simplicity, AC, Sears and most garden tractors that use the 12" rim with the 5 bolts on a 4 1/2" diameter bolt circle. These rims were widely used between most lawn and garden tractor manufactures. This is the ones you would need to buy to go from a 5 to 6 bolt or EXTREME CUSTOM LENGTH OR CUSTOM PATTERN. Sold in pairs, Unpainted. |
|||
|
|
CC-01-050 $12.00 |
Garden Tractor Dual Wheel Spacer Cover Plates |
Covers up the end of the Dual Wheel Spacers above. Raw steel - unpainted. Sold in pairs, Unpainted. |
|||
|
|
CC-01-050-P $22.00 |
Garden Tractor Dual Wheel Spacer Cover Plates - Painted |
Covers up the end of the Dual Wheel Spacers above. Painted. Sold in pairs, Unpainted. |
|||
Click on picture for more details.
|
CC-55-085SP $145.00 Priced Each |
8 1/2" Rear Rim Spoked Centers |
8 1/2" wide from bead to bead. With 2.75 back offset - deep dished. These are brand new rims and centers. Unpainted. Powder coating available - contact me for pricing and options. |
|||
|
CC-55-105SP $155.00 Priced Each |
10 1/2" Rear Rim Spoked Centers |
10 1/2" wide from bead to bead. With 2.75 back offset - deep dished. These are brand new rims and centers. Unpainted. Powder coating available - contact me for pricing and options. |
||||
|
Click on picture for more details. |
CC-55-Rework $ Call for Cost $ Priced Each |
Wheel Re-work Program |
Send us your wheels and we will cut the centers out, put in new stock centers - or custom ones. Great for converting those 4 bolt rims into 5 bolt. Call For Pricing. |
|||
|
|
CC-55-105S $95.00 Priced Each |
10 1/2" Rear Rim Correct Offset |
Super Garden Tractor Rim - 10 1/2" wide from bead to bead. With Correct offset - deep dished. These are brand new rims and centers. Unpainted. Powder coating available - contact me for pricing and options. |
|||
|
CC-55-105C $105.00 Priced Each |
10 1/2" Rear Rim Custom Offset |
Super Garden Tractor Rim - 10 1/2" wide from bead to bead. With Custom offset - deep dished. These are brand new rims and centers. Unpainted. Powder coating available - contact me for pricing and options. |
||||
|
|
CC-55-085S $90.00 Priced Each |
8 1/2" Standard Rear Rim Correct Offset |
Standard Garden Tractor Rim - 8 1/2" wide from bead to bead. With Custom offset - deep dished. These are brand new rims and centers. Unpainted. Powder coating available - contact me for pricing and options. |
|||
|
CC-55-085C $100.00 Priced Each |
8 1/2" Standard Rear Rim Custom Offset |
Standard Garden Tractor Rim - 8 1/2" wide from bead to bead. With Custom offset - deep dished. These are brand new rims and centers. Unpainted. Powder coating available - contact me for pricing and options. |
||||
|
Click on picture for more details. |
CC-04-001 $95.00 |
Garden Tractor Wheel Weight Adaptors |
The plate bolts to your rim and puts the weight to the ground, not on your axle bearings. Holds your weights off of the rim so that you do not scratch them. Plate comes with a 1" or 2" shaft so weight lifting weights work great and are readily available. Must specify shaft size and shaft length on checkout. |
|||
|
Click on picture for more details. |
CC-47-002 $55.00 ea. |
Garden Tractor Suitcase Weights |
20 pounds each. 1 1/4" thick steel - Plasma Cut Fits on 1/2" x 2" bar - not included. Unpainted. |
|||
|
Click on picture for more details. |
CC-01-011 $18.50 |
Garden Tractor Wheel Spacer Plates
|
2 - 1/4" Plates - spaces your wheels out 1/4 on each side Made from 1/4" Grade 50 Steel. Unpainted. |
|||
|
Click on picture for more details. |
CC-30-002 $38.00 |
Garden Tractor Wheel Stud Kit - 1.5" |
Convert you tractor over from wheel bolts to wheel studs. Thread in and apply Loctite Thread Locker (not included). Makes changing tires and adding dual wheel spacers a lot easier. 7/16" Fine Thread Studs, 1 1/2" long. 7/16" Fine Thread Nuts, Chrome Plated |
|||
|
CC-30-003 $43.00 |
Garden Tractor Wheel Stud Kit - 2" |
Convert you tractor over from wheel bolts to wheel studs. Thread in and apply Loctite Thread Locker (not included). Makes changing tires and adding dual wheel spacers a lot easier. 7/16" Fine Thread Studs, 1 1/2" long. 7/16" Fine Thread Nuts, Chrome Plated |
||||
|
|
CC-30-004 $2.25 |
Garden Tractor Wheel Stud - 1.5" |
7/16" Fine Thread Studs, 1 1/2" long. 7/16" Fine Thread. Sold Each. |
|||
|
CC-30-005 $2.75 |
Garden Tractor Wheel Stud - 2" |
7/16" Fine Thread Studs, 2" long. 7/16" Fine Thread. Sold Each. |
||||
|
Click on picture for more details. |
CC-55-001 $175.00 |
Custom Wheel Center Kits |
Custom wheel centers. Cut the center out of your rim, weld in the tabs and bolt in your center. Make your own design or use one of mine. Ships unpainted and unfinished. More styles to come. Unpainted. |
|||
|
Click on picture for more details. |
CC-52-001 $128.00 |
Front Wheel Heavy Duty Spindles |
Convert you tractors front spindles over to a 1" bearing and hub configuration. Axle shafts are 5" long giving you plenty to work with. Wheel stud pattern is 5 on 4 1/2" with 1/2" dia. studs. You can use these for trailers also. 2000# rating, high speed capability. Rims are available at most supply stores. Cut your front spindles off and weld these on. Heavy Duty hub kit comes complete and assembled. |
|||
|
Click on picture for more details. |
CC-52-002 $125.00 |
Axle Extensions |
Bolt on a set of spoof axle extensions to give your tractor the "big boy farmall" look. Can also be used to hang weights on. Drilled on the end to accept a 1/2" bolt. Unpainted. |
|||
|
Click on picture for more details. |
CC-52-003 $135.00 |
Cub Cadet GT Axle Extensions |
Bolt on a set of spoof axle extensions to give your tractor the "big boy farmall" look. Can also be used to hang weights on. Drilled on the end to accept a 1/2" bolt. Unpainted. FIts 4 bolt rims for newer GT lawn and Garden Tractors. |
|||
|
|
||||||
|
|
CC-94-001 |
$135.00 |
450/451 Snow Blower Spring Assist |
Spring assist for the 450 / 451 snowblowers. Bolts tot he bottom of the frame. On spread frames and newer, attaches using existing bolts and holes. Adjustable eye bolt for adjusting tension. Just like the kit originally sold by Cub Cadet for this setup. |
||
|
|
CC-93-001
Similar to Cub Cadet # 784-5415 USE 784-5415-0499 |
$45.00 |
Snow Blower Lift Bracket 450/451 on Regular Cub Cadet |
Lift bracket for adding a 450 / 451 / 551 to a 82 series or even older cub cadet. Makes your tractor from a pull to lift to a push to lift like the Super Garden Tractors. |
||
|
|
CC-86-001
Similar to Cub Cadet # 719-3097 USE 603-0027 |
$80.00 |
45" 450 451 551 Snowblower Hydraulic Lift Bracket |
Lift bracket for the newer cyclops tractors and up. Dimensionally same shape as the original, but made out of grade 50 steel and machined instead of the cast iron original ones. Grade 8 Stainless Steel hardware. Used for the lifting of front attachments, snowblowers 450, 451, 551 etc. Fits the following Models:
1440
S/N 821,060 - 880,000
1440
S/N 880,001 - 899,000 |
||
|
Click on picture for more details. |
CC-76-001 |
$55.00 |
Snow Thrower Wings |
Adds 8" total to the width of your cut. Bolts on with no drilling. Fits QA-36 and QA42 Snowthrowers. |
||
|
Click on picture for more details. |
CC-77-001 |
$28.00 |
Drift Cutters |
Attaches to the sides of your snow thrower. Aids in slicing thru deep drifts and help with guidance. Bolts on with no drilling. Fits QA-36 and QA42 Snowthrowers. |
||
|
Click on picture for more details. |
CC-78-001 |
$36.00 |
Snow Thrower Drift Hood 36" |
Attaches to the top of your snow thrower. Adds 4" of height to your blower and keeps the snow from coming over the top. Requires drilling. Fits QA-36 Snowthrowers. |
||
|
CC-78-002 |
$40.00 |
Snow Thrower Drift Hood 42" |
Attaches to the top of your snow thrower. Adds 4" of height to your blower and keeps the snow from coming over the top. Requires drilling. Fits QA-42 Snowthrowers. |
|||
|
Click on picture for more details. |
CC-78-040
Similar to Cub Cadet # IH-PO27 USE 959-3380 or 732-3037 |
$23.00 |
Push Blade Replacement Spring |
Replacement spring for the trip push blades. Also fits spring assists. Same length as OEM. Comes with eye bolt and nut. |
||
|
Click on picture for more details. |
CC-27-011
Similar to Cub Cadet # IH-61634-C1 USE 703-0659-0637 |
$38.50 |
54" Front Blade Cutting Edge
.134" Steel - OEM |
Laser cut to original OEM Specs. Unpainted.
|
||
|
CC-27-012
Similar to Cub Cadet # IH-61634-C1 USE 703-0659-0637
|
$51.50 |
54" Front Blade Cutting Edge
.250" Steel |
||||
|
CC-27-013
Similar to Cub Cadet # IH-61634-C1 USE 703-0659-0637
|
$61.50 |
54" Front Blade Cutting Edge
.188" Stainless Steel |
||||
|
CC-27-014
Similar to Cub Cadet # IH-61634-C1 USE 703-0659-0637
|
$78.50 |
54" Front Blade Cutting Edge
.250" Stainless Steel |
||||
|
CC-27-015
|
$19.50 |
54" Front Blade Cutting Edge
.375" High Density Poly Plastic |
||||
|
Click on picture for more details. |
CC-27-001
Similar to Cub Cadet # IH-464371-R2 USE 703-0658 |
$34.50 |
42" Front Blade Cutting Edge
.134" Steel - OEM |
Laser cut to original OEM Specs. Unpainted. |
||
|
CC-27-002
Similar to Cub Cadet # IH-464371-R2 USE 703-0658 |
$48.50 |
42" Front Blade Cutting Edge
.250" Steel |
||||
|
CC-27-003
Similar to Cub Cadet # IH-464371-R2 USE 703-0658
|
$57.50 |
42" Front Blade Cutting Edge
.188" Stainless Steel |
||||
|
CC-27-004
Similar to Cub Cadet # IH-464371-R2 USE 703-0658
|
$64.50 |
42" Front Blade Cutting Edge
.250" Stainless Steel |
||||
|
CC-27-005
|
$18.50 |
42" Front Blade Cutting Edge
.375" High Density Poly Plastic |
||||
|
Click on picture for more details. |
CC-51-001
Similar to Cub Cadet #
IH-466906-R11 |
Heavy Duty Skid Shoes |
Replacement for push blades. Made out of 1/4" steel on the shoe. Complete with hardware. |
|||
|
Click on picture for more details. |
CC-51-001SS
Similar to Cub Cadet #
IH-466906-R11 |
$58.00 |
Heavy Duty Skid Shoes Stainless Steel |
Replacement for push blades. Made out of 1/4" steel on the shoe. Complete with hardware. Stainless Steel |
||
|
Click on picture for more details. |
CC-26-002
Similar to Cub Cadet # IH-397024-R1 USE IH-397024-R2 |
$51.50 |
Snowblower Wear Edge - 42" |
Wear edge for QA42 QA42A Snow Throwers. Unpainted. |
||
|
Click on picture for more details. |
CC-26-002P |
$19.00 |
Snowblower Wear Edge - 42" .375" High Density Poly Plastic |
Wear edge for QA42 QA42A Snow Throwers. High Density Poly Plastic |
||
|
Click on picture for more details. |
CC-26-001
Similar to Cub Cadet # 397-023-R1 USE IH-397023-R2 |
$48.50 |
Snowblower Wear Edge - 36" |
Wear edge for QA36, QA36A,QA36B snow throwers. Unpainted. |
||
|
Click on picture for more details. |
CC-26-001P |
$18.00 |
Snowblower Wear Edge - 36" .375" High Density Poly Plastic |
Wear edge for QA36, QA36A,QA36B snow throwers. High Density Poly Plastic |
||
Click on picture for more details. |
CC-26-003
Similar to Cub Cadet # IH-90430-C1 USE 05598-0637 |
$37.50 |
Snowblower Wear Edge 45" for 450C |
Wear edge for 450C snow Blowers. Unpainted. |
||
|
CC-26-004
|
$72.50 |
Snowblower Wear Edge 45" for 450C Stainless Steel |
Wear edge for 450C snow Blowers. Stainless Steel. Unpainted. |
|||
|
Click on picture for more details. |
CC-26-004P |
$21.50 |
Snowblower Wear Edge 45" for 450C .375" High Density Poly Plastic |
Wear edge for 450C snow Blowers. High Density Poly Plastic. |
||
|
Click on picture for more details. |
CC-25-001
Similar to Cub Cadet # IH-475565-R1 USE IH-475565-R2 |
Snow Thrower Skids with Feet |
Snow thrower skids for models BB36, CW36, QA36, QA36A, QA42A, QA36B, QA42B. Unpainted. |
|||
|
CC-25-001SS |
$68.00 |
Snow Thrower Skids with Feet Stainless Steel |
||||
|
Click on picture for more details. |
CC-25-002P |
$18.50 |
Snow Thrower Skids Plastic |
Polypropleyene Plastic - 3/8" thick. Self Lubricating. Snow thrower skids for models BB36, CW36, QA36, QA36A, QA42A, QA36B, QA42B. OEM Style. Unpainted. |
||
|
Click on picture for more details. |
CC-25-002
Similar to Cub Cadet # IH-475565-R1 USE IH-475565-R2
|
$18.50 |
Snow Thrower Skids |
Snow thrower skids for models BB36, CW36, QA36, QA36A, QA42A, QA36B, QA42B. OEM Style. Unpainted.
|
||
|
CC-25-002SS
Similar to Cub Cadet # IH-475565-R1 USE IH-475565-R2
|
$42.00 |
Snow Thrower Skids Stainless Steel |
||||
|
Click on picture for more details. |
CC-25-003
Similar to Cub Cadet # 784-5038A USE 784-5038B-0637 |
$54.50 |
450 / 451 Two Stage Snow Blower Skids |
Snow thrower skids for models shown below. Made from 1/4" material and also feature slots for adjustment up and down that the factory ones didn't have. Unpainted.
Fits 350, 450, 451 Two Stage as well as, Models 420, 524, 826, 1028 |
||
|
CC-25-003SS
Similar to Cub Cadet # 784-5038A USE 784-5038B-0637
|
$78.00 |
450 / 451 Two Stage Snow Blower Skids Stainless Steel |
||||
|
Click on picture for more details. |
CC-67-001
Similar to Cub Cadet # IH 548589 R1 |
$19.50 |
Implement Lift Rod - 28 1/2" |
Implement lift rod for, mostly for the wide frame tractors. For lifting push blades, snowblowers, etc. 1/2" dia with 1/8" holes on each end for clip. Unpainted. |
||
|
CC-67-002
Similar to Cub Cadet # IH 473924 R1 |
$21.00 |
Implement Lift Rod - 34 1/2" |
||||
|
Click on picture for more details. |
CC-54-004 |
$28.00 |
Hydraulic Lift Handle - Quieline |
Replacement hydraulic lift handle. Zinc plated. Fits the Quietline 1250, 1450, 1650 and similiar. |
||
|
CC-54-003 |
$32.00 |
Hydraulic Lift Handle - Narrow Frame |
Replacement hydraulic lift handle. Zinc plated. Fits the 109, 129, 149, 169. |
|||
|
|
CC-82-001
Replaces PN/ IH-548192 R1 and IH-79011 C1 |
$32.00 |
Snowblower Curved Top Lift Arms |
Used when adding a QA snowblower to late model tractors so the chute doesn't hit the hood and also for 82 series tractors for more clearance on installation. |
||
|
|
||||||
|
Click on picture for more details.
|
CC-81-001
|
$160.00 |
Sleeve Hitch Grader Blade - 42" |
A sleeve hitch style rear grader blade. Has a separate cutting edge, adjusts 15 deg. each way. Bolt together kit - Available in 42" and 54". Has a spot on back to bolt a stock cub cadet hitch plate onto for moving trailers while leaving your blade on. If you need a hitch plate, purchase CC-53-001.
Works with:
And all other brands! |
||
|
CC-81-010
|
$175.00 |
Sleeve Hitch Grader Blade - 54" |
||||
|
Click on picture to enlarge.
|
CC-81-501
|
$305.00 |
Sleeve Hitch Grader Blade - 42" |
A 3 point hitch style rear grader blade. Has a separate cutting edge, adjusts 15 deg. each way. Bolt together kit - Sleeve hitch blade bolts to A-frame (CC-19-001) - Available in 42" and 54". Has a spot on back to bolt a stock cub cadet hitch plate onto for moving trailers while leaving your blade on. The main arm can be unbolted and the grader and head brackets will still work as a sleeve hitch blade. You will just need the back plate ($12.00 - call to order). All pins and bolts included for unit only. If you need a hitch plate, purchase CC-53-001.
Works with:
And all other brands! |
||
|
CC-81-510
|
$320.00 |
Sleeve Hitch Grader Blade - 54" |
||||
|
Click on picture for more details.
|
CC-40-001
Click Here for
|
$1195.00 |
Hydraulic Dump Trailer Plain Steel - Unpainted |
The ultimate in garden dump trailers. Built with a 2000# high speed road worthy axle and hubs, 2500 psi cylinder, 2" ball hitch and Original Cub cadet Garden Tractor Rims. 23x10.5-12 tires. Trailer is 5' long, 42" wide, 28" deep. Quick removable tailgate.
Works with:
And all other brands! |
||
|
$1295.00 |
Hydraulic Dump Trailer Primed |
|||||
|
$1395.00 |
Hydraulic Dump Trailer Painted, No Stripes / Graphics |
|||||
|
$1495.00 |
Hydraulic Dump Trailer Painted, Dual Color Stripe, Graphics |
|||||
|
Click on picture for more details. |
CC-41-001
Click Here for
|
$325.00 |
3 Point Forklift - Category 0 |
A great little attachment for your category 0 lift. This forklift option is a solid welded design without movable forks. Forks are 24" apart center to center. Pin this on and go to work by using your cat 0 three point to do your lifting.
Works with:
And all other brands! |
||
|
Click on picture for more details. |
CC-42-001
Click Here for |
$365.00 |
3 Point Landscape Rake - Category 0 |
42" wide landscape rake for your category 0 3 point system. 1" wide spring teeth are 1" apart. Bolt on teeth make it easy to replace a broken tooth.
Works with:
And all other brands! |
||
|
Click on picture for more details. |
CC-43-001
Click Here for
|
$395.00 |
3 Point Cultivator - Category 0 |
46" wide s-tine cultivator. For light garden use. Category 0 attachment. S-tines bolt on and off and multiple holes in the beam allow moving the s-tines to get varied row spacing. Ships with 1 1/2" standard cultivator tines.
Works with:
And all other brands! |
||
|
Click on picture for more details. |
CC-44-001 |
$325.00 |
Earth Ripper - 3 point - Category 0 |
42" wide hard soil ripper. Great for ripping up hard surfaces, loosening ground, or other projects. Teeth are a full .25" thick. Fully welded and ready to go. Category 0 attachment.
Works with:
And all other brands! |
||
|
Click on picture for more details. |
CC-45-001 |
$485.00 |
Box Blade - 3 point - Category 0 |
54" Heavy duty Straight Box Blade. 3/8" x 3" Grade 80 Hard Wear Cutting Edge. Category 0 attachment.
Works with:
And all other brands! |
||
|
Click on picture for more details. |
EM-100
Click Here for |
$975.00 |
Earth Mover - Scrap |
Fully functional scraper for moving dirt. Uses a 3 point lift A-Frame to lift the scraper cutting edge off the ground. Uses auxiliary hydraulics to run the belly dump.
Works with:
And all other brands! |
||
|
Click on picture for more details. |
LH-100 |
$780.00 |
Log Hog Grappler |
Category 0 log grapler. Great for picking up piles of branches, garbage, logs, etc. Heavy built. 4" long stroke ram clamps down hard onto whatever your picking up.
Works with:
And all other brands! |
||
|
Click on picture for more details. |
CC-46-001 |
$445.00 |
60" or 54" Snow / Dirt Blade |
This is a reproduction of the 42" Snow / dirt blade made by cub cadet with some changes. Can make 60" or 54"! Custom Mount bracket. This is a reproduction of the blade sold by IH / Cub Cadet. Undercarriage or lifting bracket not included but it will attach to a current or existing undercarriage. Shipped unassembled, easy assembly. Mountable to 4 wheelers, tractors, or anything that you want. Custom brackets needed for mounting to other than Cub.
Works with:
And all other brands! |
||
|
|
||||||
|
Click on picture for more details.
|
CC-85-001
|
$65.50
|
Spread Frame Front Axle Mount Bracket | Used on the 82 series (Red) tractors and up. If your front axle mount has been wrecked, cut it off and replace it with a new .25" heavy duty steel bracket. Offers 2x - 8x the load rating and shear resistance. Extra reinforcement plates included. (Not welded on) | ||
|
|
|
|||||
|
Click on picture for more details. |
CC-10-002 |
$32.00 |
Cub Cadet Raised Step Pads Steel 82 Series and Up |
Replace your worn out step pads with these steel raised step pads. Powder Coated Black. Made out of 14 ga. Steel. |
||
|
CC-10-003 |
$32.00 |
Cub Cadet Raised Step Pads Steel Quietline Series and Older |
Replace your worn out step pads with these steel raised step pads. UNPAINTED. Made out of 14 ga. Steel. |
|||
|
|
|
|
|
|
||
Click on picture for more details. |
CC-10-004 |
$38.00 |
Cub Cadet Step Pads Brite Tread Aluminum 82 Series and Up |
Replace your worn out step pads with these steel raised step pads. Made out of .062" Thick Brite Tread Aluminum. |
||
|
CC-10-005 |
$38.00 |
Cub Cadet Step Pads Brite Tread Aluminum Quietline Series and Older |
||||
|
|
|
|
|
|
||
|
Click on picture for more details. |
CC-10-006 |
$45.00 |
Cub Cadet Raised Step Pads Stainless Steel 82 Series and Up |
Replace your worn out step pads with these steel raised step pads. UNPAINTED. Made out of 14 ga. Stainless Steel. |
||
|
CC-10-007 |
$45.00 |
Cub Cadet Raised Step Pads Stainless Steel Quietline Series and Older |
||||
|
Click on picture for more details. |
CC-50-100 |
$89.00 |
Cyclops Headlight Conversion |
Get rid of the cyclops look on your tractor. Upgrade kit comes with lights and plate and is a direct hookup and replacement to the original light setup. No drilling, cutting required. Easy to convert back to original OEM if needed. |
||
|
Click on picture for more details. |
CC-50-002
|
$32.00 |
Quietline Headlight Bezel - Steel |
Fits Quieline series. 1250 1450 1650. Headlights, Gromets or Emblem not included. Unpainted. |
||
|
Click on picture for more details. |
CC-50-003 |
$58.00 |
Quietline Headlight Bezel - Brite Tread Aluminum |
Fits Quieline series. 1250 1450 1650. Headlights, Gromets or Emblem not included |
||
|
Click on picture for more details. |
CC-50-004 |
$32.00 |
Wide Frame Headlight Bezel - Steel |
Fits Wideframe series. This is for the 86, 108, 109, 128, 129, 149, 169. Headlights, Gromets or Emblem not included. Unpainted. Uses the Square Chrome bezels. PN IH-545507-R1 |
||
|
Click on picture for more details. |
CC-50-005 |
$39.00 |
Wide Frame Headlight Bezel - Stainless Steel |
Fits Wideframe series. This is for the 86, 108, 109, 128, 129, 149, 169. Headlights, Gromets or Emblem not included. Unpainted. Uses the Square Chrome bezels. PN IH-545507-R1 |
||
|
Click on picture for more details. |
CC-50-006 |
$28.00 |
Wide Frame Headlight Bezel - Steel |
Fits Wideframe series. No headlight Holes. This is for the 86, 108, 109, 128, 129, 149, 169. Headlights, Gromets or Emblem not included. Unpainted. |
||
|
Click on picture for more details. |
CC-50-007 |
$35.00 |
Wide Frame Headlight Bezel - Stainless Steel |
Fits Wideframe series. No headlight Holes. This is for the 86, 108, 109, 128, 129, 149, 169. Headlights, Gromets or Emblem not included. Unpainted. |
||
|
Click on picture for more details. |
CC-KC-001-C |
$19.50 |
Cub Cadet Keys and Key Rings / Combo Stainless Steel |
Stainless steel, .062" Thick. Keys are exact specifications to match INDAK keys or original IH Key. Laser cut. IH logo on keys are cut thru, with circular etching on the front sides. Back has no etching. Can be polished up to a brite chrome looking luster. Email for buffing prices and sets. |
||
|
|
CC-KC-001-K |
$13.50 |
Cub Cadet Key Ring Stainless Steel
|
Stainless steel, .062" Thick. Laser cut. Can be polished up to a brite chrome looking luster. Email for buffing prices and sets. |
||
|
|
CC-KC-001-S |
$5.50 |
Cub Cadet Key Stainless Steel |
Stainless steel, .062" Thick. Keys are exact specifications to match INDAK keys or original IH Key. Laser cut. IH logo on keys are cut thru, with circular etching on the front sides. Back has no etching. Can be polished up to a brite chrome looking luster. Email for buffing prices and sets. |
||
|
Click on picture for more details. |
CC-54-002 |
$60.00 |
Cub Cadet Tool Box |
Finally a bolt on tool box for your Quietline, Wideframe, 82 Series, 72 Series and others that use the Wideframe series fenders Bolts on using the existing fender mount bolts. Ships unpainted. |
||
|
Click on picture for more details. |
CC-65-001 |
$46.00 |
Quiet Line Aftermarket Muffler Box |
An aftermarket muffler shroud that replaces the stock muffler boxes that usually break due to vibration. Simplified design. Heavier sheetmetal used in producing these. Will probably crack after time also due to how they mount, but a lot more cost effective. Unpainted. |
||
|
Click on picture for more details. |
CC-49-001 |
$67.00 |
Wide Frame Bumper / Weight Bracket |
QL and 82 Series front bumper / weight bracket. |
||
|
|
||||||
|
|
CC-31-100 |
$22.50 |
Stainless Steel Exhaust Tip Flat Cut |
Stainless Steel Exhaust Tip for Diesels. This is just for the extended tip. Muffler or rest of tractor not included. Approx. 14" long. |
||
|
|
CC-31-101 |
$22.50 |
Stainless Steel Exhaust Tip Angle Cut |
Stainless Steel Exhaust Tip for Diesels. This is just for the extended tip. Muffler or rest of tractor not included. Approx. 14" long. |
||
|
Click on picture for more details. |
CC-31-001 |
$15.50 |
Kohler Fuel Atomizer |
Turns the air/fuel flow into the valve chamber into a straighter, condensed streamlined flow. 1/4" stick steel. Gaskets or bolts not included. No Guarantees if it works or not! |
||
|
Click on picture for more details. |
CC-32-001 |
$11.50 |
Kohler Carb Spacer |
Spacers your carb out by 1/4". Stack more to increase distance for performance tuning. Gaskets or bolts not included. |
||
|
Click on picture for more details. |
CC-48-001 |
$165.00 |
Cub Cadet 782D, 882 Charging System |
Fits the 782D, 882 and others with the Kubota 3 cylinder diesel motor. Alternator / Dynamo and Regulator - Brand new. |
||
|
|
CC-48-002 |
$118.00 |
Cub Cadet 782D, 882 Hi Torque Starter |
Fits the 782D, 882 and others with the Kubota 3 cylinder diesel motor (D600) . Brand new. |
||
|
|
CC-48-003 |
$62.00 |
Cub Cadet 782D, 882 NGK Glow Plugs |
Fits the 782D, 882 and others with the Kubota 3 cylinder diesel motor (D600) . 3 pack. Brand new. |
||
|
Click on picture for more details. |
CC-23-001 |
$36.50 |
Hydro Cam Pivot Bracket Newer Cubs |
Fits 1210, 1282, 680,1512, 882, 782-Diesel,1710, 682,1711, 1712, 782, 784,1912, 1914, 982, 984, 986,1210,1211,1340,1541,1572,1772,1782,1810,1811 & 1812,1860,1862,1864,1872 & 2072,1882,2082,2084,2086,2182,2284 |
||
|
Click on picture for more details. |
CC-23-003 |
$36.50 |
Hydro Cam Pivot Bracket |
Fits older cub cadets not listed above. Prior to the 82 series. Fits Quietlines. |
||
|
Click on picture for more details. |
CC-28-001 |
$11.50 |
Trunion Repair Kit |
A fix to repairing your worn out trunion bracket. Can be done in the tractor and minimal work. |
||
|
Click on picture for more details. |
CC-30-001 |
$41.50 $32.50 |
Power Steering Control Valve Mount |
For mounting the power steering sector into 82 series tractors. Very hard to find. Unpainted. |
||
|
Click on picture for more details. |
CC-30-010 |
$64.50 |
This is a tie rod upgrade to the 82 series and quite a few tractors following it. It is not for the SGT's. Will work with power steering. Rod is .375" ID x .25" wall, measuring a whopping .875 OD Diameter. Rod ends are heavy duty to take the abuse. |
|||
|
|
CC-32-002 |
$9.50 |
Charge Pump Outer Seal |
This is the seal that fits the charge pump where the drive shaft enters the front of the hydro pump. Approx. .50 ID and 1.00 OD |
||
|
Click on picture for more details.
|
CC-74-001A |
$54.00 |
Differential Cover - Sight Plug Aluminum Rear Housing |
A new style differential cover that allows you to fill your rear end without having to use the fill tube. Bottom of the fill hole is matched to the fill line on the dip stick. Bottom plug acts as a drain, and has a magnet in it for catching fine filings. .179 Steel, Unpainted. Gasket not supplied. For Aluminum Rear Ends only. |
||
|
CC-74-001C |
$54.00 |
Differential Cover - Sight Plug Cast Iron Rear Housing |
Same as above except for Cast Iron Rear Ends only. |
|||
|
Click on picture for more details.
|
CC-74-002A |
$64.00 |
Differential Cover - Clear View Aluminum Rear Housing |
Totally functional! A clear cover that allows you to see into the rear of your tractors differential housing. Cover is clear polycarbonate. Outer ring is .179 Steel, Unpainted. Gasket not supplied. For Aluminum Rear Ends only. |
||
|
CC-74-002C |
$64.00 |
Differential Cover - Clear View Cast Iron Rear Housing |
Same as above except for Cast Iron Rear Ends only. |
|||
|
|
||||||
|
Click on picture for more details. |
CC-100-001 $113.50
|
Front Hydraulic To Rear Split Kit |
This will allow you to split your front hydraulics and run a set to the back to give you more hydraulic options. You can only use front or rears at one time since this is a "Splitting Kit". Includes all the parts to complete the project - including a set of couplers and new nipples. Works on all tractors with dual Hydraulic valves. |
|||
|
|
CH-02-100F $16.50
|
1/4" NPTF Hydraulic Coupler - Female |
1/4" NPTF Female Threads. 3000PSI Rating. These are the industrial standard, which are different from the original cub cadet couplers. The Cub Cadet ones are out there and very expensive. Recommend if you are putting these on your tractor, you switch out the stock ones also. |
|||
|
|
CH-02-100FP $6.50
|
Female Coupler Plug |
Plug for above coupler. Silicone with chain and ring. |
|||
|
|
CH-02-100M $11.50
|
1/4" NPTF Hydraulic Coupler - Male |
1/4" NPTF Female Threads. 3000PSI Rating. These are the industrial standard, which are different from the original cub cadet couplers. The Cub Cadet ones are out there and very expensive. Will not fit into OEM Cub Cadet Connectors. |
|||
|
|
CH-02-100MP $6.50
|
Male Coupler Cap |
Plug for above coupler. Silicone with chain and ring. |
|||
|
|
CH-10-012 $6.50
|
1/4" NPTF Hydraulic Hose - 12" |
1/4" NPTF x 1/4" NPTF hose. 3000PSI Rating. |
|||
|
CH-10-024 $8.50
|
1/4" NPTF Hydraulic Hose - 24" |
1/4" NPTF x 1/4" NPTF hose. 3000PSI Rating. |
||||
|
CH-10-036 $10.50
|
1/4" NPTF Hydraulic Hose - 36" |
1/4" NPTF x 1/4" NPTF hose. 3000PSI Rating. |
||||
|
CH-10-048 $12.50
|
1/4" NPTF Hydraulic Hose - 48" |
1/4" NPTF x 1/4" NPTF hose. 3000PSI Rating. |
||||
|
CH-10-060 $14.50
|
1/4" NPTF Hydraulic Hose - 60" |
1/4" NPTF x 1/4" NPTF hose. 3000PSI Rating. |
||||
|
|
CH-01-001 $6.35
|
1/4" NPTF Female x 1/4" JIC Female Swivel - Steel |
1/4" JIC to 1/4" hose - use both ways. End 1 is 1/4" NPT and End 2 is 1/4" 37 degree JIC. Both Female ends. |
|||
|
CH-01-002 $6.35
|
1/4" NPTF Female x 3/8" JIC Female Swivel - Steel |
1/4" JIC to 3/8" hose - use both ways. End 1 is 3/8" NPT and End 2 is 1/4" 37 degree JIC. Both Female ends. |
||||
|
|
CH-01-010 $7.84
|
Run Tee, 1/4" JIC Male x 1/4" JIC Female Swivel x 1/4" JIC Male - Steel |
1 - JIC male, 2 - JIC female swivel, 3 - JIC male
All 1/4" ends. Great for splitting a line for another run or
adding power steering. |
|||
|
CH-01-011 $9.958
|
Run Tee, 5/16" JIC Male x 5/16" JIC Female Swivel x 5/16" JIC Male - Steel |
1 - JIC male, 2 - JIC female swivel, 3 - JIC male
All 5/16" ends. Great for splitting a line for another run or
adding power steering. |
||||
|
CH-01-012 $8.25
|
Run Tee, 3/8" JIC Male x 3/8" JIC Female Swivel x 3/8" JIC Male - Steel |
1 - JIC male, 2 - JIC female swivel, 3 - JIC male
All 3/8" ends. Great for splitting a line for another run or
adding power steering. |
||||
|
|
CH-01-020 $2.25
|
Solid Cap, 1/4" JIC |
Terminates a run or line. |
|||
|
CH-01-021 $3.25
|
Solid Cap, 5/16" JIC |
Terminates a run or line. |
||||
|
CH-01-022 $2.75
|
Solid Cap, 3/8" JIC |
Terminates a run or line. |
||||
|
|
CH-01-030 $12.44
|
Reusable Fitting, 1/4" JIC x 3/16" Hose |
Reusable fittings for making your own lines. Much cheaper than buying regular fittings and running into town just to have a crimp done. Reusable many many times.
Great for power steering applications, allows a slower flow and more control. |
|||
|
CH-01-031 $18.61
|
Reusable Fitting, 5/16" JIC x 1/4" Hose |
Reusable fittings for making your own lines. Much cheaper than buying regular fittings and running into town just to have a crimp done. Reusable many many times.
These fit the JOHN DEERE H3 hydraulic control valves and other 5/16" |
||||
|
CH-01-032 $18.61
|
Reusable Fitting, 1/4" NPT x 1/4" Hose |
Reusable fittings for making your own lines. Much cheaper than buying regular fittings and running into town just to have a crimp done. Reusable many many times. |
||||
|
|
CH-01-HR2 $2.10 / ft.
|
Hydraulic Hose, 3/16" ID" |
3/16" hose for above fittings. Sold by the foot. |
|||
|
CH-02-HR2 $2.85 / ft.
|
Hydraulic Hose, 1/4" ID" |
1/4" hose for above fittings. Sold by the foot. |
||||
|
|
BM-01-375 $2.25
BM-01-500 $2.50
BM-01-625 $2.75
BM-01-750 $3.00
BM-01-1000 $3.75
|
3/8" ID x 1/4" wall True Bushing Material
1/2" ID x 1/4" wall True Bushing Material
5/8" ID x 1/4" wall True Bushing Material
3/4" ID x 1/4" wall True Bushing Material
1.0" ID x 1/4" wall True Bushing Material
|
True bushing material. ID is .002 over nominal size with Nominal .248 wall thickness, giving the outside a true size. Example 1/2" ID x .25 wall = 1" OD. Fits over nominal shaft real nice.
Sold by the inch. Multiple cuts extra. |
|||
|
Click on picture for more details. |
CE-01-001 $8.00 / ft.
|
3/8" Thick x 3" Wide Grader Blade Cutting Edge |
Perfect for those small bucket repairs, home built graders, or other projects. Sold by the foot. |
|||
|
|
||||||
|
Click on picture for more details. |
CC-09-001 $45.00 |
Cub Cadet Mower Deck Front Wheel Brackets |
Fits 38" - 50" decks Price: $45.00 for 2 brackets - you add wheels. Unpainted. |
|||
|
Click on picture for more details. |
CC-09-100 $43.00 pr. |
Cub Cadet / Haban 60" Front Deck Replacement Wheels |
Replacement wheels for your 60" deck that had the 1/2" bolt and hard plastic wheels. These are premium wheels with hard rubber compound on the outside of cast iron hubs - molded on. They come with a greaseable inner roller bearing, sleeve, and new bolt and hardware. Bolts right on - no modifications needed. |
|||
|
|
||||||
|
|
CC-87-001 $55.00 |
Cub Cadet Original Lift Rod |
Reproduction blade lift rod for the Cub Cadet "Original". Made from .500" steel. For use with blades only. Unpainted. |
|||
|
Click on picture for more details. |
CC-21-001 $53.00 |
Cub Cadet Original Seat Pan |
Reproduction seat / fender pan for the Cub Cadet "Original". Made from .134" steel, which is a little thicker than the original seat par and a little less notch in 3 point shaft area to reduce the chances of cracking. Unpainted. |
|||
|
Click on picture for more details. |
CC-21-004 $125.00 |
Cub Cadet Original Fenders |
Reproduction Fenders for the Cub Cadet Original - Since these fenders are hard to find, I have created a "Looks Pretty Close" set. Bolts to the seat / fender pan just like the real ones. Includes hardware and 1/4" cross bar. Buy with seat / fender pan above. Unpainted. |
|||
|
Click on picture for more details. |
CC-21-006 $12.00 |
Cub Cadet Original Fender Rod |
Reproduction Fenders Rod for Original Fenders and Reproduction ones sold above. 5/16" rod. Buy with seat / fender pan above. Unpainted. |
|||
|
Click on picture for more details. |
CC-21-005 $65.00 |
Cub Cadet Original Custom Grill |
Custom grill for your Cub Cadet Original. Made from .134 galvanized steel - paintable - ships unpainted and unfinished. Unpainted. |
|||
|
Click on picture for more details. |
CC-70-001 $13.00 |
Cub Cadet Original Tail Light Bracket |
Original Cub Cadet Rear Tail Light Bracket. Unpainted. |
|||
|
Click on picture for more details. |
CC-70-002 $13.00 |
Cub Cadet Original Tail Light Bracket - Modified |
Original Cub Cadet Rear Tail Light Bracket with the hole for the wire in the middle. Unpainted. |
|||
|
Click on picture for more details. |
CC-71-003 $21.00 |
Cub Cadet Original Headlight Brackets |
Original Cub Cadet Head Light Brackets. OEM Specs. Sold Unpainted and in Pairs. |
|||
|
Click on picture for more details. |
CC-72-050 $350.00 |
Cub Cadet Original Mower Deck Shell |
Original Cub Cadet Mower Deck Shell. OEM Specs. These are made per order - shipping can take up to 5 days from order. UPS shippable. Sold Unpainted. |
|||
|
Click on picture for more details. |
CC-72-051 $23.00 |
Cub Cadet Original Deck Wheel Bracket Mount |
Original Cub Cadet Deck Wheel Bracket Mount. OEM Specs. Sold Unpainted. |
|||
|
Click on picture for more details. |
CC-71-052 $23.00 |
Cub Cadet Original Deck Wheel Bracket |
Original Cub Cadet Deck Wheel Bracket. OEM Specs. Sold Unpainted. |
|||
|
Click on picture for more details. |
CC-71-053 $55.00 |
Cub Cadet Original Deck Pulley Cover |
Original Cub Cadet Deck Pulley Cover. OEM Specs. Sold Unpainted. Per pair. |
|||
|
Click on picture for more details. |
CC-71-054 $24.00 |
Cub Cadet Original Front Frame Cover |
Original Cub Cadet Front Frame Cover. OEM Specs. Sold Unpainted. |
|||
|
|
||||||
|
Click on picture for more details. |
CC-20-007 $48.00
|
Brinly Style Clevis Plow yoke |
Turns many brand of plows into the brinly sleeve hitch style, or replace your old worn out one. Made from grade 50 steel. 5/8" pin holes. Unpainted.
|
|||
|
Click on picture for more details. |
CC-33-001 $55.00
|
Sleeve Hitch to Brinly Frame Plow Hitch Adaptor |
Convert your Sleeve Hitch Plow into A 3-Point Plow. Unpainted. |
|||
|
Click on picture for more details. |
CC-34-001 $155.00
|
3 Point Brinly Style Plow HItch |
Brinly Style Hitch for 3 Point Plows. Unpainted.
|
|||
|
Click on picture for more details. |
CC-11-002 $12.00 ea.
|
Ground Ripper Teeth |
1/4" Steel, Made to weld to a 2 1/2" x 2 1/2" bar. Unpainted. |
|||
|
|
||||||
|
|
USED-01-001 |
|||||
|
|
USED-01-002 |
|||||
|
|
USED-01-003 |
|||||
|
|
USED-01-004 |
|||||
|
|
||||||
|
Click on picture for more details. |
CC-37-001 $45.00 |
Stainless Steel Silhouettes |
Stainless steel, .048" Thick. I can use a pic of your tractor, or whatever and make a silhouette. Make 2 and make a bill holder, book ends, etc. Unpainted. |
|||
|
Click on picture for more details. |
CC-38-001 $45.00 |
Mailbox / Weathervane Top |
Make a mailbox top with your name, or favorite logo. Unpainted. |
|||
|
Click on picture for more details. |
CC-39-001 $65.00 |
Laser Cut Wall Plaque |
Custom designed and laser cut. Add a saying of your choice. You could paint and backlight it, or whatever. Unpainted. |
|||
|
|
|
|||||
|
Additional Shipping |
Ship-001 $5.00 |
Additional Shipping |
Click on add to cart to add extra shipping and change cart quantity to get you to the correct quoted shipping charge. |
|||
|
Painting
|
Paint-001 $5.00
|
Painting |
Click on add to cart to add painting and change cart quantity to get you to the correct quoted paint charge. |
|||
This electronic document and is the property of Xtreme Motorworks. It contains material and information that is confidential and proprietary to Xtreme Motorworks. This material and information are protected under federal and/or state trade secret, unfair competition and copyright laws. Any reproduction, use or disclosure without written permission from Xtreme Motorworks is prohibited. Xtreme Motorworks has no affiliations with any manufacturer listed in this site.
All products made in the USA
Will not ship outside the Continental United States, Canada, Hawaii or Alaska unless contacted first.
Contact shop@xtrememotorworks.com with questions.