More Website Templates @ TemplateMonster.com - November 14, 2011!

Category 0 Three Points and Accessories....



 


Category 0 - 3 Point Lift

     OEM Replica

Regular Garden Tractor  -  82 Series and up

Reproduction Category 0 - 3 Point lift system.   The kit is designed to work off of the single deck lift system.  You can leave your deck on and lock it in the up position while using your 3 point accessories.  Complete kit.  Retrofit to fit more tractors than the original 190-389 or 190-389-100 kit by Cub Cadet.  Pictures above are shown on a 782.  Will not work on tractors with PTO.   Part is raw steel, UNPAINTED.   Similar to Cub Cadet #190-389 and 190-389-100

PN# CC-03-001     $472.00 ea

 


 

  • Category 0 - 3 Point Lift

  •            OEM Replica

  • Super Garden Tractor  -  82 Series and up

  • Reproduction Category 0 - 3 Point lift system.   The kit is designed to work off of the single deck lift system.  You can leave your deck on and lock it in the up position while using your 3 point accessories.  Complete kit.  Retrofit to fit more tractors than the original 190-389 or 190-389-100 kit by Cub Cadet.  Pictures above are shown on a 782.  Will not work on tractors with PTO.   Part is raw steel, UNPAINTED.

    PN# CC-03-101    $472.00 ea.

 


  

Category 0 - 3 Point Lift

New! Multi Configuration

Regular Garden Tractor  -  82 Series and up

This is the same kit as CC-03-001 except the main 3 point plate is re-designed to give you more lifting configurations.  The lift arms have holes moved inwards and out to give you more or less lift height and power.   The kit is designed to work off of the single deck lift system.  You can leave your deck on and lock it in the up position while using your 3 point accessories.  Complete kit.  Retrofit to fit more tractors than the original 190-389 kit by Cub Cadet.   Ships Unpainted  Similar to Cub Cadet #190-389 and 190-389-100

PN# CC-03-001M     $480.00

 


 

Category 0 - 3 Point Lift

New! Multi Configuration

Super Garden Tractor  -  82 Series and up

This is the same kit as CC-03-001 except the main 3 point plate is re-designed to give you more lifting configurations.  The lift arms have holes moved inwards and out to give you more or less lift height and power.   The kit is designed to work off of the single deck lift system.  You can leave your deck on and lock it in the up position while using your 3 point accessories.  Complete kit.  Retrofit to fit more tractors than the original 190-389 kit by Cub Cadet.   Ships Unpainted.    Similar to Cub Cadet #190-389 and 190-389-100

PN# CC-03-101M     $480.00

 




 

  • Category 0 - 3 Point Lift

  • Quietlines and 1x9 Series

  • New Category 0 - 3 Point lift system.   Complete kit.  Never produced before!!!   Pictures above are shown on a 1650.  Will not work on tractors with PTO.  Designed to be similar to the 82 series kits below.  Will fit the following tractors without PTO: 800, 1000, 1250, 1450, 1650.    Will also fit a 129, 149 and 169  -  not tested by myself yet.     May fit others, but not tested yet.    Parts are all raw steel, UNPAINTED.    Buyer must make sure this will fit his tractor before ordering.

    PN# CC-03-013    $482.00 ea.

 


  

Category 0 - 3 Point Lift

Narrow Frames

New Category 0 - 3 Point lift system.   Complete kit.  Never produced before!!!   Pictures above are shown on a 1650.  Will not work on tractors with PTO.  Designed to be similar to the 82 series kits below.  Will fit the following tractors without PTO:  107, 127, 147    May fit other narrow frames with some small modifications to the lift shaft.    May fit others, but not tested yet.    Parts are all raw steel, UNPAINTED.    Buyer must make sure this will fit his tractor before ordering.

PN# CC-03-200    $482.00 ea.

 




Category 0 - 3 Point Lift Replacement Plate

OEM Replica

This is a replacement plate for your 3-point lift system.  Similar to kit #190-389 and #190-389-100.    Similar to Cub Cadet #703-0808   UNPAINTED

PN# CC-03-002    $185.00 ea. 

 


  

  • 82 Series Category 0 - 3 Point Lift Replacement Plate

  • New Multi Configuration

  • This is a replacement plate for your 3-point lift system.  Similar to kit #190-389 and #190-389-100 - but with multi lift configurations.    Similar to Cub Cadet #703-0808     UNPAINTED

    PN# CC-03-002M     $185.00 ea.

 


  

Quietline Category 0 - 3 Point Lift Plate

New Multi Configuration

Rear plate only for the Quietline and similiar tractors.  Plate only - non painted.

PN# CC-03-002MQ    $185.00 ea.

 


  

Category 0 - 3 Point Lift Arms

Reproduction Category 0 - 3 point Lift Arms.  Sold as a set.    Similar to Cub Cadet #703-0815    UNPAINTED

PN# CC-03-006    $90.00

 




  • Super Garden Tractor Drag Arms and Lift Link Adjusters

  • Reproduction Drag Arms and Lift Link Adjusters for the Cub Cadet Super Garden Tractors.  Just like the originals.  Comes as a complete kit as shown.  Unpainted

    PN# CC-03-043K    $225.00 set

 




Super Garden Tractor Drag Arms

Reproduction Drag Arms for the Cub Cadet Super Garden Tractors.  Just like the originals.  Comes as a pair as shown.  Unpainted

PN# CC-03-043    $160.00 pr.

 




Super Garden Tractor Lift Link Adjusters

Reproduction Lift Link Adjusters for the Cub Cadet Super Garden Tractors.  Just like the originals.  Comes as a pair as shown.  Unpainted

PN# CC-03-047    $65.00 ea.

 


 

  • Cub Cadet Category 0 - 3 Point Lift Link Kit

  • Connects the 3 point rock shaft arms to the lift arms.  5/8" - Cat. 0 ball sockets, 5/8 threaded shaft.  5/8 Furrels.  Exact Replicas.  Sold as a set.   UNPAINTED    Similar to Cub Cadet #703-0814 & 711-3122

    PN# CC-34-002    $55.00

 




Cub Cadet Category 0 - 3 Point Lift Link

Connects the 3 point rock shaft arms to the lift arms.  5/8" - Cat. 0 ball sockets, 5/8 threaded shaft.  Sold each.  Similar to Cub Cadet #703-0814

PN# CC-34-013    $24.00 set

 




Cub Cadet Category 0 - 3 Point Extended Lift Link

Just like the original ones, (CC-34-013) but 1.5" longer.  Allows you to run equipment that is lower to the ground. 

PN# CC-34-013L    $36.00 set

 




  • Cat 0 Replacement Ferrules

  • Replacement ferrule for Cub Cadet 3 point lifts.  5/8" Threaded hole, 5/8" Stud, 1/8" Pin Hole.   Similar to Cub Cadet #711-3122

    PN# CC-03-012    $36.00 pr.

 




Category 0 - 3 Point Lift Cross Chain Set

Turnbuckle Chain set keeps your equipment from swinging side to side.  Has a 250# load buckles.  Stainless steel loops bolt to your arms, providing a nice clean attachment point. Comes with hardware.  Will fit other brands.

PN# CC-33-002    $45.00

 


 

Category 0 - Adjustable 3rd Link

Connects the 3rd link to your implement.  Completely adjustable from 10" to 15".  5/8" holes.  Comes with hole in the middle and rod to make it a T-Handle.  Similar to Cub Cadet # 749-0238

PN# CC-35-002    $40.00

 




  • 3 Point Flat Drawbar

  • Fits category 0 three point hitches.  The ends are 5/8" diameter with 1/4" holes for retainer pins.  The (7) holes in the bar are 3/4" for ball hitches and other pins.  Length of the drawbar usable area is 19".  Most other ones on the market only offer the 5/8" doles on the drawbar body section.

    PN# CC-98-032    $42.00

 




3 Point Flat Drawbar Locks

If you have a category 0 3 point drawbar (CC-98-002) then these drawbar locks are a must.  Keeps the drawbar from rotating if using a ball hitch.  Clips on with D-Clips (included) and sold in pairs.  UNPAINTED

PN# CC-96-060    $32.00 / pr.

 




3 Point Upper Link Bracket

Manufactured adjustable 3 point upper link bracket.  If you have an original Cub Cadet 3 point lift, and are missing this bracket, now you can get a manufactured reproduction.  UNPAINTED

PN# CC-03-050    $33.00

 


 

  • Category 0 - Weld Ball Sockets

  •  Used for Cat. 0 projects.  2" OD, 5/8" pin hole, 1" wide.

    PN# CC-36-002     $9.50 ea.

 




Category 0 - Draft Pins

Used for Cat. 0 projects.  5/8" shaft , 5/8" Threaded end.  Includes nut and lock washer

PN# CC-36-003    $6.00 ea.

 


 

Cub Cadet Category 0 - 3 Point Lift Link Shaft

Regular 82 Non-Super Tractors

   Connects the 3 point to the hydraulic cylinder.   82 Series, Spread Frames - Unpainted.   Similar to Cub Cadet #703-0811

PN# CC-03-007A    $60.00

 


 

  • Cub Cadet Category 0 - 3 Point Lift Link Shaft

  • Most Super Tractors

    Connects the 3 point to the hydraulic cylinder.   82 Series, Spread Frames - Unpainted.   Super Garden Tractors: 982, 1912, 1914, 1872, 2072,1572,1772, 1782, 1882, 2082, 2182, 2084, 2184, 2284, 2086

    PN# CC-03-007B     $65.00

 
Cub_Cadet_quietline_3pt_lift_bar

 
  • Cub Cadet Category 0 - 3 Point Lift Link Shaft

  • Quiet Line Tractors

    Connects the 3 point to the hydraulic cylinder.   Quietline Tractors only - Unpainted.   1250, 1450, 1650

    PN# CC-03-014     $65.00

 




3 Point Load Lock

If you have a 3 point and want to hold it in the up position  while you use the mower deck, you can use this adjustable dog-bone link to hold the load in the up position.  Comes with the (2) 1/4" plates and (1) 1/2" plate, bolts and weld on tab for your equipment.  Additional weld on tabs available separately.  UNPAINTED

PN# CC-03-020     $38.00

 




3 Point Load Lock Clevis

Weld this clevis onto your implement to attach the load lock to.  5/8" dia. holes.  Can also be used for building cat 0 equipment connections. UNPAINTED

PN# CC-03-021    $11.00

 


 

Category 0 Suitcase Weight Adaptor

A weight bracket for holding suitcase weights on your 3 point lift.  Category 0 attachments.  1/2" x 2" bars allow hanging of most all garden tractor suitcase weights on the front side, back side or both.  UNPAINTED.

PN# CC-19-200     $85.00

 



Category 0 - Top Link Pin - Straight

PN# CC-36-011

$5.00 ea.

 




  • 1/4" Lynch Pins

  • PN# CC-36-005

    $1.00 ea.

 




5/8" x 1" Headed Pin

PN# CC-36-006

$3.00 ea.

 




5/8" x 1 1/2" Headed Pin

PN# CC-36-007

$3.00 ea.

 




  • 1/8" Hair Pin

  • PN# CC-36-008

    $0.60 ea.

 




Category 0 - Top Link Pin - Bent

PN# CC-36-004

$5.00 ea.

 


 

Category 0 - A-Frame with Sleeve Hitch Adaptor

A-frame for moving around your trailers, etc.  Has 3 holes for mounting balls or clevis.  Turn the frame around and has a mount for sleeve hitch equipment.  Has dual lower side holes for the lower pins to get more lift out of your 3 point.  Comes with lower Cat. 0 pins, and 3/4" sleeve adjuster bolts.  Does not include ball or top pin.  UNPAINTED.

PN# CC-19-001    $95.00

 




  • Category 0 - A-Frame

  • A-frame for moving around your trailers, etc.  Has 3 holes for mounting balls or clevis.   Has dual lower side holes for the lower pins to get more lift out of your 3 point.  Comes with lower Cat. 0 pins, and 3/4" sleeve adjuster bolts.  Does not include ball or top pin.  UNPAINTED.

    PN# CC-19-001B    $85.00

 


 

Category 0 - A-Frame Quick Attack

This is a quick attach category 0 A-frame for hooking up Category 0 equipment.  Same frame dimensions as CC-19-001.  Allows you to hook any Cat 0 equipment up in a minute and unattached as fast.  Has 3 holes on top for attaching a ball.  Does not come with a sleeve hitch adaptor.  UNPAINTED

PN# CC-19-100    $225.00

 




  • Quietline Float Lockout Pin

  • Used to remove the float in your quietlines lift system.  Great for push blades to get down pressure.  UNPAINTED

    PN# CC-03-015    $16.00

       
 
This electronic document and is the property of Xtreme Motorworks. It contains material and information that is confidential and proprietary to Xtreme Motorworks. This material and information are protected under federal and/or state trade secret, unfair competition and copyright laws. Any reproduction, use or disclosure without written permission from Xtreme Motorworks is prohibited.  Xtreme Motorworks has no affiliations with any manufacturer listed in this site.

Our Goals

A

Customer Satisfaction

Our goal is to make your shopping experience the best it can be.

B

Top Of The Line Parts

We try to make our parts better that the factory would have made them.

C

Speedy Shipping

We keep inventory on hand so that we can get your order to you as soon as we can.

D

Tested And Tried Parts

We test everything that we invent to make sure that it will be the best for you.

Thrower Wings Drift Hood 450 Extensions Cutting Edges Motor Mounts Air Cleaners Clutch Pullers Dual Wheel Spacers Exhaust Pipes Clutch Tools PTO Buttons Starters Carb Spacers Glow Plugs Wheel Brackets60" Deck Wheels Wheel Covers Front Spindles Spoof Axles GT Axle Extensions Alum Adaptors Front Bolt Hubs Bearings Lift Extender Lift Rods Cutting Edges Haban Rear Brackets Lift Brackets Skid Shoes Sleeve Blade3 PT Blade Dump Trailer Forks Landscape Rake Cultivator Ripper Box Blade Push Blade Scraper Fender Kits Fender Brackets Clutch Covers Screens Grill Screens Headlight Rings Grill Bezels Hoods Muffler Boxes Tool Boxes Step Pads Weights Weight Bumpers Keys 3 PT Conversion Ripper Teeth Clevis Yokes Brinly Plow Frame Generator Mounts Choke Brackets Grill Parts Lift Pins PTO Parts Amp Gauges Hoods Gard-N-Cart Lift Rods Fenders Seat Pans Light Brackets Decks and Parts 782 V6 4 cyl. Original Rear End Braces Rear ENd Covers Hydro Brackets Seals Trunion Repair Power Steering Driveline Parts SGT 3 PT Rear Original Wiring 70/100 Wiring NF Wiring WF Wiring QL Wiring Fittings Hoses Ends Split Kits Cutting Edge Bushing Material SGT 3 Point Kits GT 3 Point Kits QL 3 Point Kits NF 3 Point Kits CAT 0 Parts Top Links Drawbars Chain Kits Load Locks Hardware 3 Pt Weight Brackets 3 Pt A-Frames 3 Pt. Tiller Attach Hood Ornaments Loader Seals Spring Assist Parts NF Pump Brackets Tiller Adjust Parts Frankenstein Bolts JD Compact Spacers Sleeve Hitch Ball Sleeve Hitch Yoke Dual Hole Hitches Receiver Hitches Adjustable Hitches 582 Rear Covers Receiver Balls Cub Cadet John Deere Allis Ford Chevy International